Войти:
Скачали: 0   Размер: 5 mb   Производитель: Graco  
Категория: Автокресла
@name@name

3. Thread LATCH through base belt path normally used for vehicle seat belt. Make sure that LATCH is UNDER tongue on base . Belt must lay flat and not be twisted. 4. Hook Connectors to vehicle lower anchors. Pull firmly on Connectors to be sure they are attached . 5. Tighten LATCH by pushing down hard on base and pulling the adjustment belt . 6. NEVER put two LATCH connectors on one vehicle LATCH anchor unless specifically allowed by the vehicle manufacturer . 7. Test infant restraint for secure

Скачали: 0   Размер: 1017 kb   Производитель: Fisher-Price  
Категория: Автокресла
@name

• Insert a #8 x 3/4" (1,9 cm) screw (provided in this kit) through the right bracket and into the seat support. Tighten the screw with a Phillips screwdriver. Do not over-tighten. Bracket installation is now complete. • For your convenience this kit includes extra screws (just in case you misplace the screws removed in step 3). If after assembling the brackets you have extra screws, dispose of them in the garbage. 4 Seat Back Installation Instructions BACK VIEW BACK VIEW Upper Shoulder Belt Slot

Скачали: 0   Размер: 1017 kb   Производитель: Fisher-Price  
Категория: Автокресла
@name

DO NOT use this product until you have installed the brackets on the high chair frame. • The seat back can detach from the seat bottom if it is not completely snapped in place. DO NOT use this product until you have properly installed the seat back to the seat bottom and re-installed the restraint system properly on the seat. Kit Parts Tool needed for installation: Phillips Screwdriver (not included). WARNING CAUTION This kit contains small parts in it's unassembled state. Adult assembly is requ

Скачали: 0   Размер: 271 kb   Производитель: Britax  
Категория: Автокресла
@name

Colors and styles may vary. MADE IN CHINA. Please retain information for future reference. 11/05

Скачали: 0   Размер: 271 kb   Производитель: Graco  
Категория: Автокресла
@name

(Figure B). Step 5: Place Pad on seat and feed metal clips through the back 2 slots in the Pad, and then feed them through the slots in the booster seat (Figure C). Step 4: Be sure the clips are securely fastened under seat. Summer Infant, Inc. 582 Great Road PO Box 829 Slatersville, Rl 02876-0899 USA 1-800-268-6237 Summer Infant Europa« LTD. 20 Sparrows Herne Bushey, Hertfordshire WD231FXUK 44 (0)20 8420 4429 visit us at © 2005 Summer Infant, Inc. Colors and styles may vary. MADE IN CH

Скачали: 0   Размер: 271 kb   Производитель: Summer Infant  
Категория: Автокресла
@name

(Figure B). Step 5: Place Pad on seat and feed metal clips through the back 2 slots in the Pad, and then feed them through the slots in the booster seat (Figure C). Step 4: Be sure the clips are securely fastened under seat. Summer Infant, Inc. 582 Great Road PO Box 829 Slatersville, Rl 02876-0899 USA 1-800-268-6237 Summer Infant Europa« LTD. 20 Sparrows Herne Bushey, Hertfordshire WD231FXUK 44 (0)20 8420 4429 visit us at © 2005 Summer Infant, Inc. Colors and styles may vary. MADE IN CH





Категории