Войти:
Скачали: 6   Размер: 1 mb   Производитель: Epson  
Категория: Лобзики и пилы
@name@name@name

Orbital action provides a faster cut, but with a less smooth cut across the material. In orbital action, the blade moves forward during the cutting stroke in addition to the up and down motion. NOTE: Metal or hardwoods should never be cut in orbital action. To adjust the cutting action, move the cutting action lever (H) between the four cutting positions: 0, 1, 2, and 3. Position 0 is straight cutting. Positions 1, 2, and 3 are orbital cutting. The aggressiveness of the cut increase as the lever

Скачали: 4   Размер: 1 mb   Производитель: Global Machinery Company  
Категория: Лобзики и пилы
@name

Maintenance WARNING. Always ensure that the tool is switched off and the plug is removed from the power point before making and adjustments or maintenance procedures. When you have finished cutting your tiles, always disconnect the power, empty the water and fully clean and dry the machine. Installing a blade DANGER. • Never try to use a blade larger than the stated capacity of the saw. It will come into contact with the blade guard. • Never use a blade that is too thick to allow the outer blade

Скачали: 8   Размер: 115 kb   Производитель: Elektra Beckum  
Категория: Лобзики и пилы
@name

Den Kaufbeleg bitte aufbewahren! Ein Anspruch auf Garantieleistungen besteht nur gegen Vorlage des Kaufbelegs. Die Adresse Ihrer nachstgelegenen Werksvertretung finden Sie auf der hinteren Umschlagseite. Please return the enclosed warranty card to us. Retain proof of purchase! You are only entitled to claim warranty against proof of purchase. Please see back cover for manufacturer representative.s address nearest you. SVP, retournez-nous la carte de garantie jointe. Conservez le recu d'achat! La

Скачали: 11   Размер: 1008 kb   Производитель: Hilti  
Категория: Лобзики и пилы
@name

Warranty Hilti warrants that the tool supplied is free of defects in material and workmanship. This warranty is valid so long as the tool is operated and handled correctly, cleaned and serviced properly and in accordance with the Hilti Operating Instructions, all warranty claims are made within 12 months from the date of the sale (invoice date), and the technical system is maintained. This means that only original Hilti consumables, components and spare parts may be used in the tool. This warran

Скачали: 3   Размер: 1008 kb   Производитель: Hilti  
Категория: Лобзики и пилы
@name

Always keep these operating instructions together with the tool. Ensure that the operating instructions are with the tool when it is given to other persons. General information In these operating instructions, this symbol indicates points of particular importance to safety. The instructions at these points must always be observed in order to avoid the risk of serious injury. 1^1 Caution: high voltage D The numbers refer to the illustrations. The illustrations can be found on the fold-out cov

Скачали: 3   Размер: 497 kb   Производитель: Hilti  
Категория: Лобзики и пилы
@name

They must also wear respiratory protection if no dust removal system is used. Wear Wear Wear Wear eye ear protective breathing protection protection gloves protection 5.6 Protective devices Never operate the tool without the applicable protective devices (dust hood). en 17 6. Before use en -CAUTION . The cutting edges of the saw blade are sharp. . The cutting edges may present a risk of injury. . Wear protective gloves. 6.1 Extension cords If extension cords are used: Use only extension cords of

Скачали: 17   Размер: 497 kb   Производитель: Hilti  
Категория: Лобзики и пилы
@name

Ensure that the operating instructions are with the tool when it is given to other persons. Operating controls and parts On / off switch Lockbutton (only WSJ 750-ET and WSJ 850-ET) Ventilation slots Stroke rate adjustment thumbwheel Dust removal system connector Baseplate Orbital action adjustment lever Baseplate locking screw Guide roller Saw blade (insert tools) Guard Blade holder Saw blade release lever Dust removal hood Low-friction baseplate cover Anti-splinter insert Contents

Скачали: 3   Размер: 1 kb   Производитель: Hilti  
Категория: Лобзики и пилы

Скачали: 0   Размер: 2 mb   Производитель: Hilti  
Категория: Лобзики и пилы
@name

d) Do not operate the power tool without the protective devices that belong to it. e) Operate the power tool only as intended and when it is in faultless condition. f) Improve the blood circulation in your fingers by relaxing your hands and exercising your fingers during breaks between working. g) Switch the power tool on only after bringing it into position at the workpiece. h) Remove the battery before storing or transporting the power tool. i) Always guide the power tool away from your body w

Скачали: 10   Размер: 2 mb   Производитель: Hilti  
Категория: Лобзики и пилы
@name

...... el Lieto.anas pamaciba lv Instrukcija lt Kasutusjuhend et 236297 5 +|"] +[ "±"“"#"C +± +] +C +# 4 6 +± ". +} "{ "| 9 +. +{ 8 +“ 2 1 7 "[ 2 3 "} *. 1 00_Cover_WSC70_A36_P1.qxd 1.6.2006 10:23 Seite 5 2 3 4 5/6 1 2 7 6 4 3 5 1 3 7 .5mm .5mm 1 2 4 3/4 1 5 0-45°(50) 2/4 1 6 2/5 2/5 3/4 3/4 1 7 00_Cover_WSC70_A36_P1.qxd 1.6.2006 10:23 Seite 7 1400/3000 mm 60° 45° 30° 22.5° 0° 22.5°30° 45° 200 mm WGS 1400-2 WGS 1400-2 8 00_Cover_WSC70_A36_P1.qxd 1.6.2006 10:23 Seite 8 Holz / Wood / Bois Kunststo





Категории