Оценок - 4, средний балл: 3.8 ( )

Инструкция по эксплуатации Antari Lighting and Effects, модель Z-3000II

Производитель: Antari Lighting and Effects
Размер: 1.42 mb
Название файла: eb0900ae-79a1-4c7f-a281-973563cc77c8.pdf
Язык инструкции:enfrde
Перейти к скачиванию

Фрагмент инструкции

Wir begluckwunschen Sie zum Kauf Ihres neuen ANTARI Z-SERIES NEBELGERATES. Nous vous felicitons pour l’achat de votre nouvelle Z-SERIES machine a fumee d’ANTARI. ¦ Read and save these instructions ¦ Bitte lesen Sie diese Anweisungen und bewahren Sie sie gut auf ¦ Lisez et Gardez ces instructions © 2006 Antari Lighting and Effects Ltd. TeUser Manual TeUser Manual Antari Z-1200II, Z-1500II and Z-3000II Fog Machine Congratulations on the purchase of your new ANTARI Z-Series II FOG MACHINE. Introduction Thank you for choosing a ANTARI Z-Series II Fog Machine. You now own a rugged and powerful state-ofthe- art machine. Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of your ANTARI Fog Machine for years to come. Please follow these operation, safety and maintenance instructions to ensure a long and safe life for your fog machine. CAUTION: Risk of electric shock. Disconnect the appliance from the electric supply before refilling liquid, cleaning or performing maintenance on the machine. Danger of Electric Shock ¦ Keep this device dry. ¦ For inside use only. Not designed for outside use. ¦ For the 110V models, use 3-prong grounded electrical outlet only. Prior to use take care to determine that the unit is installed at the rated voltage. ¦ Always unplug your ANTARI Z-Series II Fog Machine before filling its tank. ¦ Always keep fog machine in upright position. ¦ Turn off or unplug the machine when not in use. ¦ This machine is not water-proof. If moisture, water, or fog fluid gets inside the housing, immediately unplug the unit and contact a service technician or your ANTARI dealer before using it again. ¦ No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service personnel. Danger of Burns ¦ This device is for adult use only and must be installed out of the reach of children. Never leave the unit running unattended. ¦ Never aim the output nozzle directly at people. ¦ Fog machine output is very hot. Avoid coming within 60 cm of the output nozzle during operation. ¦ Locate the fog machine in a well-ventilated area. Never cover the unit’s vents. In order to guarantee adequate ventilation, allow a free air space of at least 20 cm around the sides and top of the unit. ¦ Never aim the output nozzle at open flames. 2 ¦ If the supply cord is damaged, it must be replaced by manufacturer or its service agent or similarly qualified personnel in order to avoid a hazard. ¦ The output nozzle becomes very hot during operation (200°C). Keep flammable materials at least 50 cm away from the nozzle. ¦ Always allow your ANTARI Fog Machine to cool down before attempting to clean or service it. Danger of Explosion ¦ Never add flammable liquids of any kind (such as oil, gas, perfume) to the fog liquid. ¦ Use only high-quality, water-based fog liquid that your dealer recommends. Other fog liquids may cause clogging or “spitting”. ¦ Always make sure there is sufficient liquid in the tank. Operating this unit without liquid will cause damage to the pump as well as over-heating of the heater. ¦ If your ANTARI Z-1200II, Z-1500II or Z-3000II Fog Machine fails to work properly, discontinue use immediately. Drain all fog liquid from the tank, pack the unit securely (preferably in the original packing material), and return it to your ANTARI dealer for service. ¦ Always drain tank before mailing or transporting this unit. ¦ Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in contact with skin or eyes, rinse thoroughly with water. Note: Pay attention to all warning labels and instructions printed on the exterior of your ANTARI Fog Machine Unpacking & Inspection Open the shipping carton and verify that all equipment necessary to operate the system has arrived intact. The shipping carton should contain the following items: 1. One unit of Z-Series II Fog Machine with power cord 2. Mounting brackets with washers/screws (for Z-1200II) 3. Z-8 Multi-function remote control with attached cord (for Z-1200II) 4. Z-20 multi-function remote control with attached cord (for Z-1500II & Z-3000II) 5. User Manual If any equipment is missing contact your ANTARI dealer immediately. Before beginning your initial setup on ANTARI Z-1200II, Z-1500II or Z-3000II Fog Machine, make sure that there is no evident damage caused by transportation. In the event that the unit’s housing or cable is damaged, do not plug it in and do not attempt to use it until after contacting your ANTARI dealer for assistance. Setup ¦ Remove all packing materials from shipping box. Check that all foam and plastic padding is removed, especially in the nozzle area. ¦ Place fog machine on a flat surface and remove fog liquid tank cap. ¦ Fill with high-quality, water-based fog liquid recommended by ANTARI dealer. Any other types of fluid can damage the unit resulting in spitting and seri...

Напишите ваш отзыв об устройстве

Текст отзыва
Ваше имя:
Введите две цифры: