This is a highly versatile product range with a variety of sizes, lamping and other options. These include: 4' luminaire with a continuous louver. Lamp Options: 1 or 2, 4' 28W T5 or 54W T5 HO lamps. 4' or 5' luminaire with a louver running down the center, and a panel at each end that can accommodate a variety of options including a blank cover, air return panel, sprinkler, speaker, daylight/occupancy sensor, or an MR16 halogen downlight. Lamp Options: 1 or 2, 3' or 4' T5 or T5 HO lamps. 5' lumi
A wireway channel running down the length of the housing on one side on the top makes it easy to connect fixtures for continuous runs. The lens options include either an MPO (MICRO-PYRAMIDAL OPTIC) LENS for a more focused distribution that directs light energy away from the high-angle glare zone, or an OPAL LENS for a softer, more diffused light distribution. Both lens options provide a continuous line of light in the ceiling while hiding the lamps from view. Lamp Options: 1 or 2, 4' or 5' T5 /
Wir begluckwunschen Sie zum Kauf Ihres neuen ANTARI Z-SERIES NEBELGERATES. Nous vous felicitons pour l’achat de votre nouvelle Z-SERIES machine a fumee d’ANTARI. ¦ Read and save these instructions ¦ Bitte lesen Sie diese Anweisungen und bewahren Sie sie gut auf ¦ Lisez et Gardez ces instructions © 2006 Antari Lighting and Effects Ltd. TeUser Manual TeUser Manual Antari Z-1200II, Z-1500II and Z-3000II Fog Machine Congratulations on the purchase of your new ANTARI Z-Series II FOG MACHINE. Introduc
Press for to Lock in the set temperature. Notice the lock icon ..solid on the display. No temperature changes are allowed. Press to remove the “Heat Lock” of the heater. Notice that the lock icon will disappear. All spa functions, including temperature adjustment will be accessible. G. PANEL LOCK ..................................................................... The ICSTM controller also allows you to lock the spa Control Center to keep children or others from using any of the spa functions.
NOTE: This setting only alters the temperature for the rest of the day. Go to section “E. HEAT DAYS & TEMPERATURE” on page 8 to make permanent changes. IMPORTANT: When your spa is activated or temperature is adjusted, the spa goes through a 2-. minute calibration cycle. The controller will evaluate the temperatures at the heater and water in the spa and will determine proper operation and heating needs. The calibration process is indicated by the flashing of the heater LED on the L60 Control Cen
2320 N.W. 147th Street Miami, Florida 33054 health and relaxation for life ID PLATES ARE LOCATED IN THE FRONT OF THE SPA. A SMALL ID TAG IS FOUND IN THE BASE OF THE UNIT, AND A COMPLETE ID TAG IS FOUND ONCE THE FRONT PANELS ARE REMOVED. 09D12345BTZP817G2DC117ACB09D12345BTZP817G2DC117ACBLISTEDC USCONFORMS TOANSI/UL STD 1563CERTIFIED TOCAN/CSA C22.2 STD NO.218.1DM Industries, LTD. 2350 N.W. 147 StreetMiami, FL 33021(305) 685-5739NumberModel Number OWNER’S MANUAL for models xStream • xStream Pro •
If the Stop/Reset button is pressed twice during a workout the program will end and the console will return to the start up screen. If the Stop/Reset key is held down for 5 seconds the console will perform a complete Reset. During data entry for a program the Stop/Reset key performs a Previous Screen function. This allows you to go back one step in the programming each time you press the Stop/Reset key. The Program Keys are used to preview each program. When you first turn the console on you may
NO. 352-515 TANK MIXTURES OF DUPONT™ ASANA® XL INSECTICIDE WITH GLYPHOSATE FOR INSECT CONTROL IN “ROUNDUP READY” SUGAR BEET IN THE STATES OF COLORADO, IDAHO, MICHIGAN, MONTANA, MINNESOTA, NEBRASKA, NORTH DAKOTA, AND WYOMING This recommendation is made as permitted under FIFRA Section 2(ee) and has not been submitted to or approved by EPA. RESTRICTED USE PESTICIDE DUE TO TOXICITY TO FISH AND AQUATIC ORGANISMS. For retail sale to and use only by Certified Applicators or persons under their d
Pay close attention to correct orientation of left and right hinges. Tighten securely. Insert tilt adjustment rods (F) into threaded barrels on each side frame. Screw adjustment knobs (E) into threaded barrels on each side frame. Set adjustment rods so that connecting brackets are about 2" above side frames for the time being with rods facing straight up and down and rear mounting brackets facing out, as shown in diagram. Tighten knobs securely. Base frame assembly is now complete. Set aside.
Use care not to drill all the way through the tabletop. ^5 Attach front hinges and rear brackets to tabletop using %" Phillips screws (I). Tighten securely but use care not to over tighten and strip. ©2008 ALVIN & COMPANY, INC. • P.O. Box 188, Windsor, CT 06095-0722 WWW.alvinCO.COm Phone: 860-243-8991 • Toll-Free: 800-444-2584 • Fax: 860-242-8037 • Toll-Free Fax: 800-777-2896 lit-abiss 7/qb