Войти:
Скачали: 2   Размер: 708 kb   Производитель: Royal Sovereign  
Категория: Ламинаторы
@name

Upon arrival, thoroughly inspect the unit. It is imperative that any shipping damage is reported and a claim is filed with the delivering carrier immediately upon receipt. The laminator should be located in an area with adequate work space for feeding graphics and lamination materials. Avoid placing the laminator in a dusty area or near sources of extreme heat or cold. Once the laminator is in place, lock the casters into position(“ON” position). Always unlock the casters (“OFF” position) whe

Скачали: 28   Размер: 160 kb   Производитель: Royal Sovereign  
Категория: Ламинаторы
@name

Royal Sovereign will not be liable for personal damage or personal injury (unless primarily caused by its negligence), loss of profit, or other incidental or consequential damages arising out of the use or inability to use this equipment. LIMITED WARRANTY This warranty specifically does not cover damage to laminating rollers caused razor blades, or any sharp objects or abrasives, or failure caused by adhesives, damage caused by lifting, tilting and/or any attempt to position the machine rolling

Скачали: 18   Размер: 583 kb   Производитель: Royal Sovereign  
Категория: Ламинаторы
@name

LIMITED WARRANTY This warranty specifically does not cover damage to laminating rollers caused razor blades, or any sharp objects or abrasives, or failure caused by adhesives, damage caused by lifting, tilting and/or any attempt to position the machine rolling on the installed castors or feet on even surfaces, or improper use of the machine. Warranty repair or replacement by Royal Sovereign or its Reseller(s) does not extend the warranty beyond the initial one year date of installation. Unauthor

Скачали: 3   Размер: 708 kb   Производитель: Royal Sovereign  
Категория: Ламинаторы
@name

d I L RSH Series RSR Series RSS Series LCD Display 1. READY -When the preset temperature is reached. 2. WAIT - Blinks until preset temperature is reached. 3. STND-BY - When STND-BY button is manually pressed or if the machine has been standing idle for 2 hours . In this mode , the temperature will automatically reset to 176°F (80°C).After another hour,Power will automatically shut off. 4. UPPER TEMPERATURE - Displays upper roller set temperature. 5. LOWER TEMPERATURE - Displays lower

Скачали: 1   Размер: 583 kb   Производитель: Royal Sovereign  
Категория: Ламинаторы
@name

(range 32~320°F or 0~160°C) 3. SPEED: To change speed of the rollers by pressing button, then up or down arrow. (range 1 through 9) 4. MEMORY: To recall or change presets. To recall the settings, press MEMORY then up or down arrow. To save the settings, set desired temperatures and speeds then press the MEMORY button twice. (stores up to 9 different settings) 5. C/HOT: To change the mode from hot to cold or cold to hot lamination. In cold mode, the speed defaults to 2 (speed 1~ 9 settings) and s

Скачали: 9   Размер: 1 mb   Производитель: Royal Sovereign  
Категория: Ламинаторы
@name

2. FUNCTIONS OF BUTTONS : Upper roller temperature controller : Lower roller temperature controller UPPER SPEED LOWER UPPER SPEED- 14 - : Speed controller : Choose memorized working condition : . Increase temperature . Increase speed . Restore the memorized working setting : . Decrease temperature . Decrease speed . Restore the memorized working setting : Cold and Hot mode change : Check current temperature : Saving electricity while the machine is not being operated. : Reverse function Stay pre

Скачали: 14   Размер: 708 kb   Производитель: Royal Sovereign  
Категория: Ламинаторы
@name

Once all correct settings are displayed, you may use the foot pedal to operate the laminator for “Hands Free Operation.” To activate the machine, press the foot pedal once and then release. Repeat to stop the rollers. USING REMOTE CONTROL Located on the left hand side of the rear of the laminator, to use press: 1. RUN : To activate the rollers. 2. STOP : To stop the rollers from turning. 3. REV : To reverse the rollers. Press and hold the button (useful for jams or mis-feeds of media). 10

Скачали: 1   Размер: 4 mb   Производитель: Royal Sovereign  
Категория: Ламинаторы
@name

(Figure 3) 10. Thread the craft paper behind the Lower Idle Bar to the top film that is resting on the main roller (do not use the Lower Idle Bar for Mounting). (Figure 4) 11. Reinstall the Feed Table and the Frame-Paper Guide,and close the Safety Cover. 12. Adjust the nip setting to appropriate gap. 13. Insert and push the leader board until they reach the front nip point. 14. Push the Run button. 15. Push the leader board into the rollers. (Figure 5) Figure 5 16. Adjust the top and bott

Скачали: 3   Размер: 480 kb   Производитель: Royal Sovereign  
Категория: Ламинаторы
@name

5. Put the paper back of the film to the bobbin at take-up bar to rewind the paper back. 6. Allow some of the film with melted resin to stick to the Guiding Paper. 7. Place the film from lower shaft beneath the film from the upper roller which is already meiting. and unwind films of both rollers 30~40cm(1~1.3ft) for loosing the tension. 8. Set the pressure lever to the 1mm. 9. Set speed at 1 and press the RUN button. The films will be fed into the machine and will come out from the rear site of

Скачали: 2   Размер: 6 mb   Производитель: Royal Sovereign  
Категория: Ламинаторы





Категории