CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT D3-4-2-1-1_En-A Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. D3-4-2-1-2-2_B_En IMPORTANT: THE MOULDED PLUG This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is fitted in this plug.
1. 3. SCART INPUT 4 SIGNAL MEMORY CALL .......... Use to select AUTO, USER 1 or USER 2. See page 18. HORIZ. POSITION ...... Use to adjust the horizontal position of the image. VERT. POSITION ........ Use to adjust the vertical position of the image. FINE SYNC. ......... Use to synchronize the projector with PC input signals so that the image is not blurred. TRACKING .......... Use to avoid image noise such as wide stripes. COMPUTER INPUT ...... The unit adjusts itself automatically when connecte
• In PinP mode, both Main image and Sub image are displayed with their frames skipped. • In PinP mode, the audio of the Main image is outputted. • In PinP mode, the images may not move smoothly. • The PinP mode may not function depending on the input signal. For more details, refer to page 29. • The UXGA signal isn’t displayed as a sub image. Still How to stop the picture temporarily (still picture). 1. Press the STILL button on the remote control. The picture will freeze temporarily. To resume
(Available only when VIDEO is selected as the source.) • When the TV50 (PAL, SECAM) signal is inputted, TINT can’t be adjusted. SHARPNESS ...... Adjusts the image sharpness. The image sharpness rises as the number increases. GAMMA MODE ..... When AUTO is selected, the appropriate gamma mode is automatically selected depending on the input signal. For normal use, select AUTO. Select DYNAMIC for computer sources. Select STANDARD for sport scenes and video sources. Select THEATER for projecting fil
1. To remove the filter cover, press the ridged area gently, push the cover in the direction of the arrow and lift. 2. Remove the air-filter from the filter cover. 3. Wash the air-filter. • Use water or a mild detergent diluted with water to clean the filter. Rinse the filter thoroughly and let it dry completely. Filter 4. Attach the filter to the cover. Filter cover 5. Reinstall the filter cover. Important: • If the filter is damaged or becomes extremely dirty, contact your dealer for replaceme