Войти:
Скачали: 3   Размер: 176 kb   Производитель: Grizzly  
Категория: Рубанки
@name

To achieve the best results when using your specific type of hand plane, we recommend reading books and magazines, and researching the internet. Inventory A. Plane .......................................................... 1 B. Blade .......................................................... 1 C. Frog ............................................................ 1 Setting the Blade 1. Insert the frog beveled-edge down into the throat until it stops on its own or until the groove in the top of the

Скачали: 3   Размер: 2 mb   Производитель: Woodstock  
Категория: Рубанки
@name

Lay the components out to inventory them. Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for safer shipping. Jointer Inventory: (Figures 4-5) Qty A. Jointer Bed Assembly.....................................1 B. Fence........................................................1 C. Dust Collection Bag.......................................1 D. Push Blocks........

Скачали: 0   Размер: 10 mb   Производитель: Woodstock  
Категория: Рубанки
@name

Besides the data sheet and parts in this insert, the content in the Model W1754 owner's manual is the same for both machines. Before operating your new machine, you MUST read and understand this insert and the entire Model W1754 manual to reduce the risk of injury from improper use or setup. If you have any further questions about this manual insert or the differences between the Model W1754S and the Model W1754, contact our Technical Support at (360) 734-3482 or email tech-support@shopfox.biz.

Скачали: 3   Размер: 8 mb   Производитель: Woodstock  
Категория: Рубанки
@name

The anti-kickback fingers hang from a rod suspended across the cutter headstock. The anti-kickback fingers should be inspected regularly. Check the fingers (Figure 37) to ensure that they swing freely and easily. If the fingers do not swing freely and easily, clean them with a wood resin solvent. Proper operation of the anti-kickback fingers is essen- tial for the safe operation of this machine. Failure to ensure that they are working properly could result in serious operator injury. Figure 37.

Скачали: 0   Размер: 8 mb   Производитель: Woodstock  
Категория: Рубанки
@name

Contents INTRODUCTION..................................................................................................3 INTRODUCTION SET UPELECTRICAL SAFETYWoodstock Technical Support............................................................................ 3 Specifications............................................................................................... 4 Controls and Features..................................................................................... SAFETY............

Скачали: 1   Размер: 4 mb   Производитель: Woodstock  
Категория: Рубанки
@name

Besides the data sheet and parts in this insert, the content in the Model W1742 owner's manual is the same for both machines. Before operating your new machine, you MUST read and understand this insert and the entire Model W1742 manual to reduce the risk of injury from improper use or setup. If you have any further questions about this manual insert or the differences between the Model W1742S and the Model W1742, contact our Technical Support at (360) 734-3482 or email tech-support@shopfox.biz.

Скачали: 13   Размер: 650 kb   Производитель: Metabo  
Категория: Рубанки
@name

This precision pays off for our customers, especially with routers and planers. Their areas of application require absolute precision. Adjustments, trimming or dressing jobs demand precision to the millimetre. With routers, the safety aspect is also of importance. Good for whoever relies on Metabo. Metabo. Work. Don’t play. 176 | ROUTERS AND PLANERS ROUTERS AND PLANERS | 177 Of E 1812Of E 1229 Signal OFE 738 ROUTERS COMMON FEATURES .. Sturdy 2-column guide .. Robust plastic-covered aluminum die

Скачали: 17   Размер: 4 mb   Производитель: RIDGID  
Категория: Рубанки
@name

ATTACHING THE PLANER TO A VACUUM See Figure 3. The chip collection system of the hand planer has a 1-1/4 in. port for inserting a vacuum hose. . Remove the dust bag. . Attach a vacuum hose to the chip exhaust. . Connect the vacuum to a power supply. WARNING: When the tool is not connected to a vacuum, always reinstall the dust bag back onto the tool. Failure to do so could cause dust or foreign objects to be thrown into your face or eyes, which could result in possible serious injury. 11 WARNING

Скачали: 5   Размер: 4 mb   Производитель: RIDGID  
Категория: Рубанки
@name

n Apply downward pressure toward the rear handle as you reach the end of the planed cut. This helps keep the rear section of the planer base in contact with the work and prevents the front of the planer from gouging the cut. WARNING: Be careful to avoid hitting nails or any other foreign objects during planing operation; this action could nick, crack, or damage blades. NOTE: We suggest that you always keep an extra set of blades on hand. As soon as the blades in your planer show signs of becomin

Скачали: 11   Размер: 2 mb   Производитель: RIDGID  
Категория: Рубанки
@name

THICKNESS PLANER R4330 Your new planer has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a RIDGID® product. SAVE THIS MANUAL FOR FUTURE REFERENCE table of contents . Introduction..........................





Категории