Оценок - 3, средний балл: 3.3 ( )

Инструкция по эксплуатации MicroBoards Technology, модель DX-2

Производитель: MicroBoards Technology
Размер: 160.29 kb
Название файла: 568b431c-b81b-406a-a32f-a3d29d525b03.pdf
Язык инструкции:en
Перейти к скачиванию

Фрагмент инструкции

Click the Next button to begin the Zulu2 installation process. installation process, please refer 1. Once the Hardware Setup is complete, verify 2. After the installation process completes, remove the check from the Reboot the Installation section of the User’s and the connections to the computer are secure. Computer box and click Finish. Rebooting will occur after installing SureThing. Manual. 2. Turn on the computer to which SureThing CD Labeler Installation: the DX-2 Disc Publisher is connected. Once the computer 1. Click the Start button and select Run from the Start menu. Click the Browse Hardware Setup: button and go to the CD/DVD drive, highlight SureThing.exe and click the boots, you will be notified that the Open button, then click OK. space should have enough vertical space to allow for easy loading found. 1. Unpack the DX-2 Disc Publisher and place it in the selected workspace. This new USB connection has been 2. Read the Software License and Warranty information and click the I Accept the input hopper and have enough room at the back to allow for any button to continue the installation of SureThing. 3. Click the Next button. discs to exit the DX-2 Disc Publisher without obstacles. 3. Click the Next button at the Welcome screen. switch located on the back of the unit. Next, press the power button on the front Software CD into the CD/DVD 2. Plug in the power cord to the back of the DX-2 Disc Publisher and turn on 4. Place the DX-2 Disc Publisher 4. To install to the default directory, panel to turn on the printer. ROM drive. click Next on the Select 3. Install the Output Bin on the front of the DX-2 Disc Publisher and tightly 5. Windows 2000: Select the option to Search for a suitable driver, and click Destination Directory screen. If secure using the 2 thumbscrews. Next. Check the CD-ROM Drives Box and click Next. Click the Next button you wish to install to a different again when you are notified that the driver has been found. location, select that location 4. Install the Microboards ink cartridges. THE DX-2 DISC PUBLISHER WILL ONLY OPERATE WITH MICROBOARDS INK CARTRIDGE MODELS PRF19ML AND PRF38ML. before clicking Next. Windows XP: Select the option to Install from a list or specific location and click Next. Check the Search Removable Media box and click Next. 5. Select adding a desktop shortcut and the location in which 6. The Digital Signature screen will appear. Click the Yes button at the bottom of A. Remove the tape from the front of the DX-2 Disc Publisher, lift the lid, and the Start Menu shortcut will be the screen. The drivers will then be copied to the hard drive. remove the tape from the print carriage once it has moved to the center of the created, or make no changes to printer. select the default locations. 7. Once the USB drivers have been copied, click the Finish button. Click Next when the locations B. Raise the cradle latches. Remove the ink cartridges from the packaging 8. The Print driver installation will occur next. Repeat steps 3 through 7 to install are suitable. and carefully remove the plastic tape covering the print head. the print drivers. C. Gently push the ink cartridges into the appropriate cradles. Do not try to 6. Click Start on the next screen to install the application. force the cartridges into place as doing so may damage the cartridge. 9. Verify the installation of the DX-2 Disc Publisher by clicking the Start button. 7. Click Finish once the installation is complete. You will also have the opportunity Select Printers and Faxes from the Start menu, either through the Settings D. Secure the cradle latches and close the lid. The print carriage will return to to register the software on-line. menu for Windows 2000 or directly in the Start menu for Windows XP. You will the right neutral position. see the new printer installed and available for use. 8. The driver and software installation is now 5. Connect the DX-2 Disc Publisher to the computer using the USB cable provided. complete. The computer will need to be Please be sure the computer is off during this process. DX-2 Disc Publisher controller and Software Installation: rebooted for the software to operate correctly. A. Plug the small end of the USB cable into the back of the DX-2 Disc Publisher. Click OK to reboot. If you choose not to reboot The DX-2 Disc Publisher controllers, PrassiTech Zulu 2, and SureThing Disk Labeler at this time, click the Cancel button to reboot B. Plug the larger end of the USB cable into an available port on the are included on the Software disc. PC. Confirm that both ends of the cable are securely connected. later. Remember, the computer must be DX-2 Disc Publisher Controller Installation: rebooted prior to running the DX-2 Disc Publisher, Zulu2, or SureThing. USB 2.0 support on the PC is required. 6. Turn the PC on at this point. 1. Click the Start button and select Run from the Start menu. Click the Browse The Hardware Setup is now complete. Proceed to the installation of the ...

Напишите ваш отзыв об устройстве

Текст отзыва
Ваше имя:
Введите две цифры: