Оценок - 5, средний балл: 4.2 ( )

Инструкция по эксплуатации Acoustic Research, модель XMC90

Производитель: Acoustic Research
Размер: 379.73 kb
Название файла: XMC90_OM.pdf
Язык инструкции:en
Перейти к скачиванию

Фрагмент инструкции

Power On/Off Button (Standby) 11. Integral Scroll Wheel/Volume Control/Select Button 2. DISP Button (Preset) 12. MODE Button 3. DIRECT Button (Direct/Preset A,B,C) 13. Infrared (IR) Receiver Window 4. MENU Button 14. LCD Display 5. XM: Category, AM/FM: Search, CD: Stop (¦) 15. ALARM 2 Button 6. XM: Ch Down, AM/FM: Ch Down, 16. SLEEP Button CD: Previous Track 17 ALARM 1 Button 7. CD Play/Pause ( ) Button 18. Speaker, 4” Subwoofer 8. XM: Ch Up, AM/FM: Ch Up, CD: Next Track 19. SNOOZE/Mute Button 9. XM: Category, AM/FM: Search, CD: Eject ( ) 20. Number Buttons (1-10) 10. CD Player Slot (Label Up) VERSION V 0.0 Page 2 of 20 MODEL XMC90 OWNER’S MANUAL 2.0 Unit Description 2.1 Power On/Off Button ( ) When this button is pressed, power is applied to the radio circuits from the standby mode, and the unit enters into the play mode (XM/FM/AM/AUX/iPod). When pressed again during any play mode, power is removed from the radio circuits and the unit reverts to the standby mode. The default play mode is XM. (Standby Mode) (Play Mode) Press this button to enter into play mode from standby mode Press this button to return to standby mode from any 2.2 SNOOZE/Mute Button play mode When pressed during normal play mode (XM/FM/AM/AUX/iPod), the audio output is muted or disabled as indicated by the speaker icon in the upper right corner of the display screen. When pressed again, the mute function is canceled and audio is restored. While the alarm is active, press this button to enter the snooze mode. Press this button to mute play mode audio Press this button again to cancel the mute function 2.3 DIRECT Button (Preset) During normal operation, direct selection of the radio frequency in the XM, FM or AM radio modes is possible. To change FM or AM frequency, use the CH Up/Down buttons or directly enter desired frequency using the number (1-10) buttons. To search radio frequencies in FM/AM modes, press the CAT Up/Down buttons. In XM mode, the CAT Up/Down buttons provide a jump to the various broadcast categories or genres. When the DIRECT button is pressed, Direct (DIR) disappears on the display, and is replaced with preset bank A, B or C. Each bank is capable of storing up to 10 radio frequencies in memory. The frequency is stored by pressing the corresponding number buttons (1-10) for 3 seconds, thus permitting memory storage of 30 frequencies. When this button is pressed and held, the list of stored frequencies in the current band can be viewed. Press the CH Up or Down buttons to scroll through the preset channel list. VERSION V 0.0 Page 3 of 20 MODEL XMC90 OWNER’S MANUAL 2.3.1 FM/AM Radio Ranges In DIRECT mode, the FM radio band ranges from 88.1 to 107.9MHz, while the AM band ranges from 530 to 1710kHz. 2.3.2 Changing FM/AM Radio Frequencies FM and AM radio frequencies can be changed by using the CH Up/Down buttons; each button press changes the frequency in 100kHz steps (FM). Pressing the CAT Up or Down button enters the frequency search mode. Press the CH +/- buttons to change FM frequency in 100kHz steps; press select OR Press the number buttons to directly enter frequency; press select to confirm Press the CAT +/- buttons to auto search for desired FM or AM frequency Press DIRECT button to preset A, B, C, and hold number button (1-10) over 3 seconds to store station frequency in memory bank Press and hold DIRECT button A over 3 seconds to display list of stored frequencies in current bank. Press the CH Up or 7 preset Down buttons to scroll through selections VERSION V 0.0 Page 4 of 20 MODEL XMC90 OWNER’S MANUAL 2.4 MENU Button When MENU is pressed, a list of menu items appears on the display. Select the desired item using the Channel Up ( • CH ) and Channel Down ( CH • ) buttons to highlight the item; then press the SELECT button to enable adjustment of the selected parameter. Menu Item: 1-SOFTWARE VERSION 2-FACTORY DEFAULT 3-LCD SETTING 4-AUDIO SETTING 5-XM SETTING 6-CLOCK SETTING 2.4.1 SOFTWARE VERSION: When selected, this item displays the software version and XM version installed in this unit. During any play mode, press the menu button; then press CH+/- to highlight this item Then press select 2.4.2 FACTORY DEFAULT: When selected, this item returns all user presets to factory default parameters. During any play mode, Note: All custom settings will be lost, including presets. press the menu button; then press CH+/- to highlight this item Press CH+/- to highlight this item; then press select 2.4.3 LCD DISPLAY SETTING: Contrast Setting: When selected, this item enables adjustment of the display contrast within the range 0~10. The factory default setting is 3. During any play mode, press the Press CH+/- to highlight this item; menu button; then then press select. press CH+/- to Adjust contrast highlight this item range using CH+/- and press select VERSION V 0.0 Page 5 of 20 MODEL XMC90 OWNER’S MANUAL Display Setting: Enter this item to switch the LCD screen image from positive to negative. 2.4.4 AUDIO SETTI...

Напишите ваш отзыв об устройстве

Текст отзыва
Ваше имя:
Введите две цифры: