Оценок - 2, средний балл: 4 ( )

Инструкция по эксплуатации iOptron, модель 9802

Производитель: iOptron
Размер: 1012.08 kb
Название файла: 99938c5a-5682-4cc9-a989-cb6ee54e3e73.pdf
Язык инструкции:en
Перейти к скачиванию

Фрагмент инструкции

One of the most intuitive controllers on the market. • Over 5,000 object database. • Built-in 32-channel GPS (#9801 & #9802 only) • Large LCD screen with 4 lines and 21-character wide screen • Drive motor with 5-speed setting for better control. • Dual-axis Servomotor • Aluminum tripod • 80mm achromatic refractor telescope PACKAGE CONTENTS • SmartStar® telescope mount • #8405 Hand Controller • Built-in GPS receiver (#9801 & #9802 • Controller Cable only) • 3x Barlow lens • 80mm Refractor telescope • 45. diagonal • Tripod • K 10mm and K 25mm eyepieces ONLINE CONTENTS (click under “Support” menu button) • Full manual (you can refer to the full manual for more details on set-up and operation). • Tips for operating • Reviews and feedback from other customers • Accessories information (including AC adapter, carry bag, and more) Assembly Terms 1. Telescope tube 2. Dovetail lock 3. Hand controller 4. Altitude lock 5. Mount (shown with GPS) 6. Diagonal 7. Eyepiece 8. Height adjustment handle 9. Center Tripod Lock Knob 10. Leg Locks (3) 11. Tripod 12. Tripod height lock knob 13. Height Extender iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | Toll Free (866) 399-4587 | Quick Start Guide for SmartStar®-R80 Telescopes (with and without GPS) Step 1. Unlock the leg locks #10 (shown by arrows at left). Extend tripod legs. Lock the leg locks afterwards. Step 2. Turn the center tripod lock knob (#9) to secure and stabilize the tripod. Tighten to a firm feel. Caution: Make sure you loosen the tripod lock knob before collapsing the tripod to store away. Threaded bolt #12 knob #8 Step 3. Attach mount to tripod by placing the mount onto the threaded bolt on tripod. Then turn the mount until it is securely fastened to the tripod. Use height adjustment handle (#8) to adjust the height of the mount. (Caution: Do not extend beyond 6 inches from top of tripod.) Make sure to tighten the tripod height lock knob (#12). Step 4. Lift the battery cover. Carefully pull out the battery holder from the compartment. Be sure not to accidentally disconnect the wires. Step 4a. Insert 8 AA batteries (not included) in the holder. Refer to the diagram on the holder to orient the batteries properly. Replace the holder back into the battery compartment and replace the lid. For reference: the battery pack fits in with wires on the bottom right. (See arrow in photo). Use only fresh batteries. Using old or low batteries may cause error messages. An optional AC adapter and 12V car plug cable are also available for purchase at #2 knob Step 5. Attach telescope to mount using dovetail lock knob (#2). iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | Toll Free (866) 399-4587 | 45. diagonal Focus knob eyepiece Step 6. Insert 45. diagonal: Insert the diagonal (#6) into the eyepiece side of the telescope. Tighten the thumbscrews to a firm feel only. Insert the eyepiece: Remove the supplied...

Эта инструкция также подходит к моделям:
Оптические приборы - SmartStar 9501 (1012.08 kb)
Оптические приборы - SmartStar 9502 (1012.08 kb)
Оптические приборы - SmartStar 9801 (1012.08 kb)
Оптические приборы - SmartStar R80 (1012.08 kb)

Напишите ваш отзыв об устройстве

Текст отзыва
Ваше имя:
Введите две цифры: