Оценок - 2, средний балл: 3.5 ( )

Инструкция по эксплуатации Canon, модель EOS 40D

Производитель: Canon
Размер: 5.33 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию

К этому устройству также есть другие инструкции:

Фрагмент инструкции

• If the image has been erase-protected, it cannot be erased. (p.123) The shooting date and time displayed is incorrect. • The correct date and time has not been set. (p.41) No image appears on the TV screen. • Make sure the video cable plug is connected all the way in. (p.122) • Set the video OUT format (NTSC/PAL) to the same video format as the TV. (p.39) • Use the video cable that came with the camera. (p.122) Error Codes Error code If there is a problem with the camera, an error message appears. Follow the on- screen instructions. To recover from the error screen, turn the power switch off and on, or remove and reinstall the battery. If error 02 (CF card problem) is displayed, remove and reinstall the CF card or format the card. This may resolve the problem. If the same error keeps appearing, there may be a problem. Write down the error code and consult your nearest Canon Service Center. Countermeasures 177 178 System Map Eyecup Eb Rubber Frame Eb Eyepiece Extender EP-EX15 Angle Finder C Date / time CR2016 lithium battery E-series Dioptric Adjustment Lenses Wide Strap EW-100DGR ST-E2 220EX 430EX 580EX II Macro Ring Lite MR-14EX Bundled Accessories Macro Twin Lite MT-24EX Battery Pack BP-511A Battery Pack BP-511A, BP-514 Battery Grip BG-E2N Battery Charger CG-580 or CB-5L AC Adapter AC-E2 DC Coupler DR-400 Compact Power Adapter CA-PS400 Battery Charger CG-570 Compact Power Adapter CA-570 Car Battery Cable CB-570 Battery Magazine BGM-E2 AC Adapter Kit ACK-E2 Focusing Screen Ef-D Ef-S Focusing Screen Ef-A TV/Video computer Personal OSK-E3 Security Kit Original Data PictBridge-compatible printer Mac OS X Windows 2000 Windows XP Windows Vista LC-5 Controller Wireless RS-80N3 Switch Remote TC-80N3 Controller Timer Remote USB GPS unit USB external media USB port PC card slot Ethernet port access point Wireless LAN adapter Wireless LAN WFT-E3/WFT-E3A Transmitter System Map 179 EF-S lenses EF lenses CF card Card reader PCMCIA adapter Interface Cable IFC-200U Interface Cable IFC-500U Wireless FileVideo Cable VC-100 EOS DIGITAL Solution Disk Software Instruction Manual Using the Battery Grip If you plan to use the camera with Battery Grip BG-E2, originally dedicated to the EOS 20D and EOS 30D, read the following. For instructions other than “Detaching the Battery Compartment Cover” and “Battery Life” explained below, refer to the Battery Grip BG-E2 Instruction Manual. If you have Battery Grip BG-E2N, read the BG-E2N’s Instruction Manual. Detaching the Battery Compartment Cover • Put the camera on a flat surface and hold it firmly so it does not fall. • Open the battery compartment cover and pull it out at a slanted angle to remove. • Store the detached battery compartment cover in the battery grip. • To reattach the battery compartment cover, slant it at the same angle when it was removed and insert the cover’s hinge into the camera. Battery Life At 23°C / 0°C (73°F / 32°F) [Approx. shots] Power No Flash 50% Flash Use BP-511A x 2 2200 / 1900 1600 / 1400 Size-AA alkaline batteries 400 / 200 300 / 100 Specifications •Type Type: Digital, single-lens reflex, AF/AE camera with built-in flash Recording media: Type I or II CF card * Compatible with Microdrive and 2GB and larger CF cards * Recording to USB external media enabled with Wireless File Transmitter WFT-E3/E3A attached Image sensor size: 22.2 x 14.8mm Compatible lenses: Canon EF lenses (including EF-S lenses) (35mm-equivalent focal length is approx.1.6 times the lens focal length) Lens mount: Canon EF mount • Image Sensor Type: High-sensitivity, high-resolution, large single-plate CMOS sensor Pixels: Effective pixels: Approx. 10.10 megapixels Total pixels: Approx. 10.50 megapixels Aspect ratio: 3:2 Color filter system: RGB primary color filter Low-pass filter: Located in front of the image sensor, non-removable Dust deletion feature: (1) Automatic sensor cleaning (2) Manual cleaning of sensor (3) Dust Delete Data appended to the captured image • Recording System Recording format: Design rule for Camera File System 2.0 Image type: JPEG, RAW (14-bit) RAW+JPEG simultaneous recording: Provided (sRAW+JPEG also possible) File size: (1) Large/Fine : Approx. 3.5 MB (3888 x 2592 pixels) (2) Large/Normal : Approx. 1.8 MB (3888 x 2592 pixels) (3) Medium/Fine : Approx. 2.1 MB (2816 x 1880 pixels) (4) Medium/Normal: Approx. 1.1 MB (2816 x 1880 pixels) (5) Small/Fine : Approx. 1.2 MB (1936 x 1288 pixels) (6) Small/Normal : Approx. 0.7 MB (1936 x 1288 pixels) (7) RAW : Approx. 12.4 MB (3888 x 2592 pixels) (8) sRAW (Small RAW) : Approx. 7.1 MB (1936 x 1288 pixels) * Exact file sizes depend on the subject, ISO speed, Picture Style, etc. File numbering: Consecutive numbering, auto reset, manual reset Color space: sRGB, Adobe RGB Picture Style: Standard, Portrait, Landscape, Neutral, Faithful, Monochrome, User Def. 1 - 3 181 Specifications Recording functions: With the WFT-E3/E3A attached, image recording to the CF card and to USB external media connected to the WFT-E3/E3A will be...

Напишите ваш отзыв об устройстве

Текст отзыва
Ваше имя:
Введите две цифры: