Войти:
Скачали: 0   Размер: 2 mb   Производитель: Yamaha  
Категория: Акустика
@name@name@name@name@name@name@name

English Using two subwoofers Right main speaker Left main speaker OUTPUT + – +– + – +– INPUT 2 AUTO PHASE STANDBY INPUT 1 TO SPEAKERS /MONO LOW NORM REV OFF HIGH FROM AMPLIFIER POWER OFF ON OUTPUT + – +– + – +– INPUT 2 AUTO PHASE STANDBY INPUT 1 TO SPEAKERS /MONO LOW NORM REV OFF HIGH FROM AMPLIFIER POWER OFF ON SPLIT SUBWOOFER OUTPUT + – +– + – +– INPUT 2 INPUT 1 TO SPEAKERS /MONO FROM AMPLIFIER OUTPUT + – +– + – +– INPUT 2 INPUT 1 TO SPEAKERS /MONO FROM AMPLIFIER Subwoofer Amplifier To AC out

Скачали: 0   Размер: 5 mb   Производитель: Yamaha  
Категория: Акустика
@name@name@name@name@name@name@name

Do not bundle or roll up the excess part of the cables. If the connections are faulty, no sound will be heard from the subwoofer or the speakers, or both of them. Make sure that the + and – polarity markings of the speaker cables are observed and set correctly. If these cables are reversed, the sound will be unnatural and lack bass. Caution Do not let the bare speaker wires touch each other, because this could damage the subwoofer or the amplifier, or both of them. ¦Before connecting Remove the

Скачали: 0   Размер: 3 mb   Производитель: Yamaha  
Категория: Акустика
@name@name@name@name@name@name@name

• When connecting to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on the rear panel of the subwoofer. If connected, they will not produce sound. English 3 CONNECTIONS CONNECTIONS Using one subwoofer Subwoofer POWER VOLUM E OUTPUT TO SPEAKERS INPUT 2 /MONO HIGH LOW HIGH CUT INPUT 1 FROM AMPLIFIER ON OFF OUTPUT TO SPEAKERS INPUT 2 /MONO HIGH LOW HIGH CUT INPUT 1 FROM AMPLIFIER Amplifier To AC outlet Mono pin cable (not included) Audio pin c

Скачали: 0   Размер: 2 mb   Производитель: Yamaha  
Категория: Акустика
@name@name@name@name@name@name@name

AC 110/120/220/240V, 50/60 Hz Power Consumption YST-SW305 ................................................................ 80W YST-SW205 ................................................................ 70W (In the standby mode: 0.8W) Dimensions (W x H x D) YST-SW305 ......................... 235 mm x 585 mm x 445 mm (9-5/16” x 23” x 17-1/2”) YST-SW205 ......................... 235 mm x 485 mm x 402 mm (9-5/16” x 19-1/8” x 15-13/16”) Weight YST-SW305 ........................................ 21 kg

Скачали: 0   Размер: 343 kb   Производитель: Yamaha  
Категория: Акустика
@name

Muchas gracias por haber elegido este sistema de altavoces de ultragraves YAMAHA. 1. Leer cuidadosamente este manual para obtener el mejor rendimiento posible. Mantenerlo en un lugar seguro para utilizarlo como referencia en el futuro. 2. Instalar el aparato en un lugar fresco, seco y limpio, alejado de ventanas, aparatos que produzcan calor, lugares con muchas vibraciones, polvo, humedad o frio. Evitar aparatos que causen ruidos de zumbido (transformadores y motores). Para evitar incendios o de

Скачали: 0   Размер: 344 kb   Производитель: Yamaha  
Категория: Акустика
@name

Bitte lesen Sie diese Bedienungsanleitung sorgfaltig durch, um sich grundlich mit dem Gerat vertraut zu machen. Heben Sie die Bedienungsanleitung auf, um auch spater noch nachschlagen zu konnen. 2. Das Gerat an einem kuhlen, trockenen und sauberen Platz aufstellen, entfernt von Fenstern, Warmequellen, Erschutterungen, Staub, Feuchtigkeit und Kalte. Entfernt von elektrischen Storquellen (Transformatoren, Motoren) aufstellen. Nicht Regen oder Feuchtigkeit aussetzen, um elektrische Schlage und Feue

Скачали: 0   Размер: 340 kb   Производитель: Yamaha  
Категория: Акустика
@name

• Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT. • To connect with a YAMAHA DSP amplifier, connect the SUBWOOFER (or LOW PASS etc.) terminal on the rear of the DSP amplifier to either the left (L) or right (R) INPUT 2 terminal. Using one unit This unit OUTPUT INPUT2 AUTO Left speaker Right speaker Using two units This unit This unit To AC outlet To AC outlet Amplifier Right speakerLeft speaker Pin plug cords OUTPUT INPUT2 PHASE BASS TO SPEAKERS INPUT1 FROM AMPLIF

Скачали: 0   Размер: 6 mb   Производитель: Yamaha  
Категория: Акустика
@name@name@name@name@name@name@name

Normally, set the control to the main speaker’s rated minimum reproducible frequency*. * The main speaker’s rated minimum reproducible frequency can be looked up in the speakers’ catalog or owner’s manual. 6 Increase the volume gradually to adjust the volume balance between the subwoofer and the main speakers. Normally, set the control to the level where you can obtain a little more bass effect than when the subwoofer is not used. If the desired response cannot be obtained, adjust the HIGH CUT c

Скачали: 0   Размер: 6 mb   Производитель: Yamaha  
Категория: Акустика
@name@name@name@name@name@name@name

Replace both batteries with new ones. Notes . Use only AA, R6, UM-3 batteries for replacement. . Be sure the polarities are correct. (See the illustration inside the battery compartment.) . Remove the batteries if the remote control will not be used for an extended period of time. . If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. 30°30° Re

Скачали: 0   Размер: 2 mb   Производитель: Yamaha  
Категория: Акустика
@name@name@name@name@name@name@name

In such a case, face the subwoofer obliquely to the wall. It also may be necessary to break up the parallel surfaces by placing bookshelves etc. along the walls. Use the nonskid pads Put the provided nonskid pads at the four corners on the bottom of the subwoofer to prevent the subwoofer from moving by vibrations etc. CONNECTIONS Caution: Plug in the subwoofer and other audio/video components after all connections are completed. • All connections must be correct, that is to say L (left) to L, R





Категории