Войти:
Скачали: 23   Размер: 4 mb   Производитель: Powermatic  
Категория: Рубанки
@name

Report any damage immediately to your distributor and shipping agent. Do not discard any shipping material until the planer is installed and running properly. Compare the contents of your container with the following parts list to make sure all parts are intact. Missing parts, if any, should be reported to your distributor. Read the instruction manual thoroughly for assembly, maintenance and safety instructions. NOTE: To remove the box from atop the planer table, loosen the table lock handle,

Скачали: 2   Размер: 332 kb   Производитель: Powermatic  
Категория: Рубанки
@name

User friendly features like simple controls, a quick access hinged top and 5”-diameter, top-mounted dust port make the POWERMATIC PM201HH, 22" Planer easy to operate and maintain. The high tech helical cutterhead is designed to produce silky-smooth surfaces on the wood without constant sharpening or cutter replacement. The POWERMATIC PM201HH, 22" Planer is available in three versions. The #1791267 201HH, 22" Planer comes with a 7.5HP 1PH 230V motor. The #1791268 201HH, 22" Planer also has a 7.5H

Скачали: 17   Размер: 199 kb   Производитель: Powermatic  
Категория: Рубанки
@name

Loaded with features and built for performance and value. The Gold Standard Since 1921. PM15 Planer/Molder The new PM15 from Powermatic FEATURE BENEFIT is loaded with features that make it a standout. Large 5HP motor gives the unit 15" wide planing capacity and enough power to run double knife sets for molding. The stand is fully enclosed and is equipped with integral casters for shop mobility. Two feed speeds, 10 and 20 fpm’s allow you to run quickly for maximum stock removal yet slower speed

Скачали: 8   Размер: 139 kb   Производитель: Powermatic  
Категория: Рубанки
@name

When you require the ultimate in accuracy, capacity and user- friendly features, the PJ-882HH 8" Parallelogram Jointer fits the bill – and then some. Built from heavy-duty iron castings for long-term durability the PJ- 882HH 8" Parallelogram Jointer weighs in at a hefty 744 lbs. The full 8” cut width and 82” overall bed length make straightening the largest project pieces exceptionally accurate. Add the fully adjustable parallelogram tables, easy knife setting and the PJ- 882HH 8" Parallelogram

Скачали: 2   Размер: 106 kb   Производитель: Powermatic  
Категория: Рубанки
@name

Simply loosen its retaining screw, turn the insert to its new position and tighten the screw. The infeed table height adjustments are truly unique. The handle can be moved up and down for coarse height changes or, after snugging the locking knob (to the left) the long handle can be rotated to make very fine, precise infeed table height adjustments. The durability of the carbide combined with the low impact, shear cutting action mean the inserts have an extremely long life, far exceeding that of

Скачали: 3   Размер: 106 kb   Производитель: Powermatic  
Категория: Рубанки
@name

Creating flat, straight surfaces is crucial in the quest to build elegant projects. Virtually all forms of joinery and the tools that cut them depend on straight edges and square cuts. The POWERMATIC 54A/54HH 6” Jointer makes it easy to achieve the high levels of accuracy you need in this always-crucial operation. Base Cabinet The 21”-wide by 13”-deep all steel base cabinet provides stable footing for the POWERMATIC 54A/54HH 6” Jointer and puts the table surface at a comfortable 32” above the fl

Скачали: 6   Размер: 161 kb   Производитель: Powermatic  
Категория: Рубанки
@name

POWBtMAHC 22" Planer This 1,300 lb. heavy-duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives. The hood comes standard with a 5" dust port for easy attachment to any dust collection system. The cutterhead is complete with four high speed steel knives and turns at 4,800 rpm producing 19,200 cuts per minute. The anti-kick back fingers and pressure bar are located in close proximity to the cutterhead

Скачали: 8   Размер: 2 mb   Производитель: Powermatic  
Категория: Рубанки
@name

Proceed as follows: 1. Connect power, and turn on the planer. 2. Take a scrap board and measure its exact thickness with calipers. 3. Raise or lower the table so the scale reads the thickness of the board minus 1/16". Feed the board through the planer. 4. Move the table up another 1/16". Flip the board over and plane the other side. 5. Measure the board with calipers and compare with the depth scale on the planer. If the scale needs adjustment, loosen the screws and shift the scale up or down as

Скачали: 4   Размер: 2 mb   Производитель: Powermatic  
Категория: Рубанки
@name

If one of our tools needs service or repair, one of our Authorized Service Center located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848. MORE INFORMATION WMH Tool Group is consistently adding new products

Скачали: 5   Размер: 565 kb   Производитель: Powermatic  
Категория: Рубанки
@name

4 31 ............ 6012094..................Hex Nut............................................................M16 x 2.0................... 4 32 ............ 6012095..................Foot ................................................................................................... 4 33 ............ 6012096..................Set Screw ........................................................M8 x 1.25P x 30Lg...... 1 34 ............ 6012097..................Hex Nut..............................





Категории