Оценок - 2, средний балл: 4 ( )

Инструкция по эксплуатации ClearSounds, модель TALK500 ER

Производитель: ClearSounds
Размер: 2.9 mb
Название файла: af910cf9-eb8e-45d8-b33d-cc4e058410b7.pdf
Язык инструкции:enesfr
Перейти к скачиванию

Фрагмент инструкции

Please read this User Guide carefully in order to get the very best results from your telephone. Keep the manual near the telephone for easy reference. Please visit our web site at to: Register your product, download additional manuals, and review trouble shooting tips. WARNING: The Talk500ER Emergency Connect Telephone should be tested regularly to ensure proper delivery of your pre-recorded emergency message when activated by the Emergency Button or pendant. This is your responsibility as the user of the product. The Talk500ER does not guarantee that you will make contact or receive help. The Talk500ER is only an aid to assist you in calling for help. CAUTION: The Talk500ER phone is capable of amplifying sounds to a loud volume. It is important to instruct all potential users of its proper operation. It is advised to adjust the volume control to its minimum level when not in use and alert other users that hearing damage can potentially result from misuse. Important Safety Instructions Follow basic safety precautions when using your telephone to reduce the risk of fire, electric shock and injury to persons. • Plug the adapter into an outlet that is easily accessible and near the equipment. • Keep your phone dry; if it gets wet, wipe it immediately. • Handle your phone carefully, DO NOT drop it • Keep your phone away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. Do not use liquid cleaners or aerosol cleaners on the phone. • Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. • Avoid using the telephone during electrical storms. There may be a remote risk of electric shock from lightning. • Do not use the telephone if you suspect a gas leak in the area. For optimal performance it is recommended that the TALK500ER is used on a conventional phone line. Performance may vary with VOIP or other digital services. .............................................................................. Remove screwsto open batterycompartment. Hold down toactivate or deactivateemergency call. LED lights REDwhen pressed. Water Proof Pendant location of controls 1 Hook Switch 2 Handset Holder 3 Dial – Press to confirm phone functions or automatically dial the selected caller ID record or phonebook number, or return to the standby mode when setting the phone. 4 Delete – To delete selected number/name/option 5 Memory Dial Buttons – Store numbers to dial with one touch 6 Keypad 7 Handset Volume Control (Booster) 8 Boost LED – Lights when booster is activated. 9 Boost 10 Speakerphone Button with LED – Press to switch between the handset and speakerphone, or to make, answer or end a call. 11 Ringer LED 12 New Call LED 13 / Buttons – Use to scroll through menu options 14 SOS –Hold down to activate or deactivate emergency call 15 Menu Button to select options 16 Caller ID/Phonebook 17 Call Waiting Button 18 Mute – Handset and Speakerphone 19 Redial – Press to view the last dialed number 20 Ringer / Set the ringer volume 21 Tone - Slide to adjust the tone volume for the handset when BOOSTER is activated 22 Volume – Slide to adjust the speakerphone volume 23 Telephone Line Jack 24 Power Jack. INSTALLATION Installing Batteries in the Phone Your telephone requires four AA batteries (not supplied) in case of network power failure for LCD backup & operations. When appears on the display or the display dims, replace the batteries with new batteries. Note: Should you choose not to install batteries - the telephone numbers in memory and the voice recordings are stored in non-volatile flash memory and will not be lost. 1 Before opening the battery compartment, make sure the telephone is disconnected from the telephone line and the power supply. 2 Use a flat-blade screwdriver to lift the battery compartment door. 3 Insert 4 AA batteries into the compartment as indicated by the polarity symbols. 4 Snap the battery compartment door back into place. Installing Batteries in the Pendant Your pendant comes with one 12V A23 battery. When the LED on the pendant dims, replace the battery. Using a screwdriver, open the battery cover, insert a new battery with the correct polarity, and replace the battery cover. Battery Notes: 1 Replace batteries quickly to save records. 2 Use only fresh batteries of the required size and recommend type. 3 Do not mix batteries of different size or type. 4 Always remove old or weak batteries. Batteries can leak chemicals than can damage electronic parts. Connecting The Telephone 1 Plug one end of the telephone line cord into the TEL.LINE jack at the back of the telephone base. 2 Plug the other end of the telephone line cord into the phone jack on the wall. 3 Plug one end of the coil cord into the handset’s modular jack. 4 Plug the other end of the coil cord into the left side of the telephone base. Note: Peel the plastic label from your phone’s display before using your p...

Напишите ваш отзыв об устройстве

Текст отзыва
Ваше имя:
Введите две цифры: