Оценок - 2, средний балл: 4 ( )

Инструкция по эксплуатации Acoustic Research, модель PW101

Производитель: Acoustic Research
Размер: 619.4 kb
Название файла: PW101_OM.pdf
Язык инструкции:enes
Перейти к скачиванию

Фрагмент инструкции

2. Plug all connected equipment directly into the power conditioner. Note: Power plugs can be heavy and may cause the conditioner to tip backwards slightly. If this happens, pull out the extending arm on the left size of the conditioner’s back panel. This arm stabilizes the unit. 3. Turn on the power conditioner. The LED will illuminate when the unit is powered on. Your power conditioner provides maximum surge protection even if the power switch is in the off position. DEVICE121GROUNDEDOUTLETRECEIVERTVVCRDVDAUDIO EQUIPMENT22222CAUTION! DO NOT connect to an ungrounded outlet. DO NOT use with 2-wire extension cords or adapters. This power conditioner is designed for indoor use only. Install the power conditioner away from heat emitting appliances such as radiators or heat registers. Do not install where excessive moisture is present. Do not plug extension cords into the power conditioner. Never install electrical or telephone wiring during a lightning storm. DO NOT USE FOR MEDICAL OR OTHER LIFE SUPPORT EQUIPMENT OR OTHER HIGH RISK ACTIVITIES. DO NOT USE IN DAMP AREAS OR NEAR WATER RELATED APPLICATIONS SUCH AS AQUARIUMS, HOT TUBS, ETC. Indicator Lights• “Protected” indicator-The protected indicator on your power conditioner should be on when the power switch is turned on. If this indicator goes out and the power light is on, it means your power conditioner has sacrificed itself to protect your equipment and should be replaced. • “Grounded” indicator-The grounded indicator on your power conditioner should be on when the power switch is turned on. If the light does not come on when you turn on the power conditioner, a ground wiring problem may exist and you should contact an electrician to properly ground the outlet. Connecting your power conditioner to an improperly grounded outlet will void all Thomson warranties. • “Volts” indicator (available on PW101 only)-The voltage indicator tells you the number of volts coming from the outlet you’ve plugged the power conditioner into. Coax Cable ConnectionsPhone/Fax/ModemConnecting 1. Connect the Phone/Fax/ Modem line from your wall outlet to the INPUT jack on the power conditioner. 2. Connect a second phone cord into the OUTPUT jack on the power conditioner. Pass the phone/fax/modem connection through the jacks on your power conditioner as illustrated. Pass the coaxial cable connection through the protected coaxial jacks on your power conditioner. Most TV/VCR/Satellite receiver damage can be prevented if you connect the coaxial cable through the power conditioner. TELEPHONEWALL JACKCONNECT TO DEVICE'STELEPHONE JACKPOWER CORDDEVICE(receiver, computer, etc.) 1231. Connect the Cable/Antenna line from your source to the INPUT jack on the power conditioner. 2. Connect the coax cable from the OUTPUT jack of the power conditioner to the device you want to protect. CABLE/ANTENNAOUTLETCONNECT TODEVICE'S COAX JACKINOUTTV/VCR/CABLE DEVICE121GROUNDEDOUTLETRECEIVERTVVCRDVDAUDIO 3. Connect the other end of the second phone cord cable to the Phone/Fax/Modem jack of the device you want to protect. Resetting the Power Conditiner after a Power Surge• If the power conditioner does not turn on, it may indicate that the conditioner has experienced a power surge and needs to be reset. To reset the power conditioner, press the reset button on the left side of the conditioner. Limited Lifetime Product WarrantyAudiovox Electronics Corporation (the “Company”) warrants to you the original retail purchaser of this product that should it, under normal use and conditions, be proven defective in material or workmanship during its lifetime while you own it, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below. Do not return this product to the Retailer. This Warranty does not cover product purchased, serviced or used outside the United States or Canada. This Warranty is not transferable and does not extend to costs incurred for installation, removal or reinstallation of the product. This Warranty does not apply if in the Company’s opinion, the product has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No per...

Эта инструкция также подходит к моделям:
Источники питания и БП - PW100 (619.4 kb)

Напишите ваш отзыв об устройстве

Текст отзыва
Ваше имя:
Введите две цифры: