Войти:

Sanus Systems VP1

Скачали: 1Размер: 6 mb    Производитель: Sanus Systems  
Категория: Проекторы

3. PITCH-justering Lossa lasskruven for PITCH-justering med en #2 Phillips-skruvmejsel. Vrid mikrojusteringsskruven for PITCH at hoger eller vanster med en #2 Phillips-skruvmejsel tills bilden ar inriktad pa malet. Dra at lasskruven for PITCH-justering med en #2 Phillips-skruvmejsel. 6901-002053 <00> Русский ПРЕДУПРЕЖДЕНИЕ! ВАЖНЫЕ ИНСТРУКЦИИ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ – СОХРАНИТЕ ЭТИ ИНСТРУКЦИИ – ПЕРЕД ЭКСПЛУАТАЦИЕЙ ИЗДЕЛИЯ ПОЛНОСТЬЮ ПРОЧТИТЕ ДАННОЕ РУКОВОДСТВО Технические характеристики • Нагрузка

Sanus Systems VMCC1

Скачали: 0Размер: 6 mb    Производитель: Sanus Systems  
Категория: Плиты

Sanus Systems VMCC1

Скачали: 0Размер: 17 mb    Производитель: Sanus Systems  
Категория: Плиты

The VMCC1 is designed to mount a center channel speaker below a Sanus VMSA, VMAA, VMAA18, VMAA26, VMDD or a VMDD26 Flat Panel Wall Mount. Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or contact Sanus at 800.359.5520 or Check carefully to make sure that there are no missing or defective parts. Our customer service representatives can quickly assist you with installation questions and missing

Sanus Systems VISIONMOUNT VMCA9

Скачали: 0Размер: 2 mb    Производитель: Sanus Systems  
Категория: Регистраторы времени

The VMCA9 ceiling plate is designed to attach to an NPT 1-1/2 in. threaded pipe. The VMCA9 will support a maximum weight of 226.8 kg (500 lbs). - CAUTION - Do not use this product for any purpose not explicitly specified by Sanus Systems. Improper assembly may cause property damage or personal injury. If you do not understand these directions, or have doubts about the safety of the assembly, contact Sanus Systems Customer Service or call a qualified contractor. Sanus Systems is not liable for

Sanus Systems VISION MOUNT VMPO

Скачали: 0Размер: 739 kb    Производитель: Sanus Systems  
Категория: Кухонная посуда

It can also be used with a VM200 for tilting LCDs or a VMPL50 for Plasmas. Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or contact Sanus at 800.359.5520 or Check carefully to make sure that there are no missing or defective parts. Our customer service representatives can quickly assist you with installation questions and missing or damaged parts. Replacement parts for products purchased thro

Sanus Systems TELEVISION TURNTABLES TV32

Скачали: 0Размер: 489 kb    Производитель: Sanus Systems  
Категория: Телевизоры

When Using the TV27 or TV32 use the rear Pilot Hole. Step 3: Insert the Plastic Dowels into the larger holes in the Support Pillar as shown in the Diagram on the right. Gently tap the Plas- tic Dowels in with a hammer if needed. Repeat step for the other Support Pillar. Step 4: Thread the Allen Bolts up through the Base of the TV-VCR Kit, and into the corresponding holes in the Support Pillar. Tighten Allen Bolts with the provided Allen Key until they are tight. Step 5: Add the TV Turntable to t

Sanus Systems TELEVISION TURNTABLES TV27

Скачали: 0Размер: 489 kb    Производитель: Sanus Systems  
Категория: Телевизоры

Supplied Parts: (1) Television Turntable Supplied Parts: (1) Self Adhesive Protective Feet (pad of 4) Diagram 1Step 1: Position the Turntable so the black nylon swivel is facing up. Locate the circles at the end of each spoke. Next, place a Adhesive Foot inside each circle, as shown in Diagram 1. NOTE: If you are going to use the optional TV-VCR Kit, Proceed to the instructions for those at the bottom of the page, otherwise, proceed to Step 2. Step 2: Flip the Turntable over and place it in the

Sanus Systems TELEVISION TURNTABLES TV20

Скачали: 0Размер: 489 kb    Производитель: Sanus Systems  
Категория: Телевизоры

Paul, MN 55113 800.359.5520 7.6.04 TVTurntable (sold separate) SupportPillar SupportPillar SupportPillar SupportPillar SupportPillar SupportPillar SupportPillar SupportPillar SupportPillar SupportPillar Support PillarPillarPillarPillarPillarPillarPillarPillarPillarPillarPillarPillarPillarPillarPillar BaseBaseBaseBaseBaseBaseTV Turntable (sold separate) Pillar SupportPillar SupportPillar Support Base Step 1: Remove the swivel from the TV Turntable by removing the Phillips Screw in the center of t

Sanus Systems TELEVISION TURNTABLES TV13

Скачали: 1Размер: 489 kb    Производитель: Sanus Systems  
Категория: Телевизоры

Please check carefully to make sure there are no miss- ing or defective parts. Never use defective parts. Improper assembly may cause damage or injury. If you do not understand these directions, or have any questions about this assembly please contact Sanus at 800.359.5520 or We can quickly assist you with installation questions and missing or damaged parts. Supplied Parts: (1) Television Turntable Supplied Parts: (1) Self Adhesive Protective Feet (pad of 4) Diagram 1Step 1: Position the Turntab

Sanus Systems TELEVISION TURNTABLES TV-VCR

Скачали: 0Размер: 489 kb    Производитель: Sanus Systems  
Категория: Телевизоры

Phillips Screw Bottom ofBottom ofBottom of TurntableTurntableTurntableTurntableTurntableTurntableTurntablePhillips Screw TV-VCR Kit BaseTV-VCR Kit BaseTV-VCR Kit BaseTV-VCR Kit BaseTV-VCR Kit Base Front Pilot Hole Rear Pilot Hole Plastic DowelsLarger HoleLarger HoleLarger HoleLarger HoleLarger HoleLarger HoleLarger Hole Support Pillar Top of TV-VCR BaseTop of TV-VCR BaseTop of TV-VCR BaseTop of TV-VCR Base Nylon Swivel is Allen Bolts Located on the Bottom Top of TVTurntableTop of TVTurntableTop





Категории