Войти:

Pittsburgh Corning TORQUE WRENCH 808

Скачали: 0Размер: 207 kb    Производитель: Pittsburgh Corning  
Категория: Дрели и шуропопверты

Failure to do so can result in serious injury. Save this manual. Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be

Pittsburgh Corning TORQUE WRENCH 807

Скачали: 0Размер: 207 kb    Производитель: Pittsburgh Corning  
Категория: Дрели и шуропопверты

Select the desired socket and verify 3. it fits properly on the nut or bolt being tightened. Press the socket firmly onto the drive 4. anvil. Lock Knob 5. Turn the Lock Knob at bottom of the Handle counterclockwise until it stops. Turn the handle to set the torque. To 6. set to 55, for example: 5020189(A) 706080 a. Turn the knurled handle (CW or CCW) until the “0” graduation on the bevel edge lines up with 50. See illustration (A), above. 5075634(B) The 50 line is shown in grey because it will l

Pittsburgh Corning TORQUE WRENCH 3293

Скачали: 0Размер: 207 kb    Производитель: Pittsburgh Corning  
Категория: Дрели и шуропопверты

Do not drop. Inspect before every use; do not use 5. if damaged or parts loose. Keep away from children.6. For your safety, service, calibration, 7. and maintenance should be performed regularly by a qualified technician. Use only sockets with the correct 8. drive and rated to at least the torque that will be applied to it. Specifications Model 2696 807 Torque Range 20-200 in-lb 5-80 ft-lb Drive 1/4” 3/8” Length 11” 14-1/4” Accuracy ±4% Model 239 808 3293 Torque Range (ft-lb) 20-150 50-300 100-6

Pittsburgh Corning TORQUE WRENCH 2696

Скачали: 2Размер: 207 kb    Производитель: Pittsburgh Corning  
Категория: Дрели и шуропопверты

Use only within rated torque range. 3. Do not use for loosening. Use as intended only. Do not use 4. as hammer or pry bar. Do not use handle extension to increase force. Do not drop. Inspect before every use; do not use 5. if damaged or parts loose. Keep away from children.6. For your safety, service, calibration, 7. and maintenance should be performed regularly by a qualified technician. Use only sockets with the correct 8. drive and rated to at least the torque that will be applied to it. Spec

Pittsburgh Corning TORQUE WRENCH 239

Скачали: 10Размер: 207 kb    Производитель: Pittsburgh Corning  
Категория: Дрели и шуропопверты

Visit our website at: Read this material before using this product. Failure to do so can result in serious injury. Save this manual. Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product d

Pittsburgh Corning 95841

Скачали: 2Размер: 496 kb    Производитель: Pittsburgh Corning  
Категория: Дрели и шуропопверты

Select the desired socket. Make certain that the socket fits properly on the Nut or Bolt being threaded on or off. Set the Torque Wrench to the desired Torque. The Torque Wrench can be set for digital readout in Inch-Lbs., Ft.- Lbs., N-m, m-Kg and Cm-Kg. Slide On-Off Switch to the ON position-see Figure 1. The Wrench has an Auto- Off Feature and will automatically shut off after two minutes of non-operation. Press the Function Button to scroll through the readout functions-see Figure 1. Rotate t

Pittsburgh Corning 95840

Скачали: 2Размер: 496 kb    Производитель: Pittsburgh Corning  
Категория: Дрели и шуропопверты

Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353. Page SKU 95840-95841 For technical questions, please call 1-800-444-3353. Specifications 95840-3/8” 95841-1/2” Drive 3/8” 1/2” Net Weight 2.2 Lbs. 2.55 Lbs. Material Carbon steel head and tube, thermoplast





Категории